{"title":"Varnishes and impregnators","description":"\u003cp\u003eSealers are the final step in stamped concrete. They enhance the color, seal the pores and protect the surface from water, oils and dirt.\u003c\/p\u003e\u003cp\u003eUnder normal pedestrian traffic, the coating is reapplied approximately every two years. Water-based and solvent-based options are available in a range of finishes.\u003c\/p\u003e","products":[{"product_id":"aguasol","title":"Aguasol – water-based sealer for stamped concrete","description":"\u003cp\u003eAguasol is a water-based sealer for sealing and protecting stamped concrete in indoor and outdoor areas. It is an acrylic copolymer dispersion based on esters of acrylic and methacrylic acids and is part of the Colorcem Impreso system.\u003c\/p\u003e\u003cp\u003eOnce dry, it forms a satin, slightly glossy film that seals the surface, does not yellow, is alkali-resistant, and preserves the original texture of the paving. It helps reduce cracking and is also used for the long-term maintenance of all types of concrete paving.\u003c\/p\u003e\u003cp\u003eIt is applied to stamped concrete laid with Colorcem Impreso, after removing the release agent Desmoldeante P. As a water-based product, Aguasol is not recommended for driveways and parking areas used by vehicles: hot tires can soften or lift the film. For these areas, the manufacturer recommends the solvent-based MS-83 sealer, which is considerably more durable.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 L canister","offer_id":58279083016574,"sku":"AGUASOL","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-aguasol-1_27617732-1f63-4dd8-9fa7-1e08eaa86b8c.jpg?v=1792594050"},{"product_id":"aguasol-plus","title":"Aguasol Plus – concentrated water-based sealing varnish","description":"\u003cp\u003eAguasol Plus is a concentrated copolymer dispersion in water with a high solids content, designed to cure, seal and protect stamped concrete in indoor and outdoor areas. It is also used to preserve and maintain all types of concrete paving over time.\u003c\/p\u003e\u003cp\u003eDilute with at least 50% clean water before use. Once dry, it forms a satin finish that does not yellow, is alkali-resistant and preserves the original texture of the paving.\u003c\/p\u003e\u003cp\u003eApply to stamped concrete finished with Colorcem Impreso, after removing the Desmoldeante P release agent. As a water-based product, Aguasol Plus is not recommended for areas subject to vehicle traffic or for car parks, as hot tyres may soften or even lift the film. For these areas, the manufacturer recommends the solvent-based MS-83, which is significantly more durable.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 L canister","offer_id":58279083573630,"sku":"AGUASOL PLUS","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-aguasol-plus-1_4853f944-4805-4edc-b65b-2d675e61fe9f.jpg?v=1792594058"},{"product_id":"aguasol-acril","title":"Aguasol Acril – pure acrylic water-based sealant varnish","description":"\u003cp\u003eAguasol Acril is a concentrated sealing varnish based on pure acrylic emulsion, designed to seal and protect stamped concrete in indoor and outdoor areas. It is particularly suitable for protecting exterior concrete paving and is also used to maintain all types of concrete paving over time.\u003c\/p\u003e\u003cp\u003eBefore use, dilute with at least 50% clean water. It forms a satin, slightly glossy film that does not yellow, is alkali-resistant, preserves the original texture of the paving, and reduces the formation of cracks. It dries quickly: touch-dry in about 30 minutes, and a subsequent coat can be applied after about 4 hours.\u003c\/p\u003e\u003cp\u003eApply to stamped concrete finished with Colorcem Impreso, after removing the release agent Desmoldeante P. As a water-based product, Aguasol Acril is not recommended for areas with vehicle traffic or car parks, as hot tires may soften or lift the film. For these areas, the manufacturer recommends solvent-based MS-83, which is significantly more resistant.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 L canister","offer_id":58279084327294,"sku":"AGUASOL ACRIL","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-aguasol-acril-1_eca14b73-b6e6-4af5-93a2-c7e40300a43b.png?v=1792594066"},{"product_id":"ds-90","title":"DS-90 – transparent solvent-based sealing varnish","description":"\u003cp\u003eDS-90 is a clear varnish based on high-quality special resins, designed for the protective sealing of stamped concrete, natural stone and similar surfaces. It is applied as a final coat to concrete slabs, sealing and protecting them and slowing their wear. It also acts as a dustproof coating.\u003c\/p\u003e\u003cp\u003eThe product belongs to the manufacturer’s solvent-based range (aromatic hydrocarbon solvents) and is applied undiluted. It forms a glossy, waterproof film with excellent adhesion that is resistant to abrasion, weathering, alkalis and grease, enhancing the appearance of the paving. On light-colored surfaces, it may yellow slightly over time and when exposed to sunlight.\u003c\/p\u003e\u003cp\u003eIt is used on stamped concrete made with Colorcem Impreso or Colorcem 1, after allowing it to cure for at least 28 days and ensuring that the release agent Desmoldeante P has been completely removed and the surface has dried. The film is impermeable to water vapor, so a vapor barrier must be installed before the concrete is poured. Where yellowing must be avoided, the manufacturer recommends MS-83, which is also the specifically recommended varnish for areas subject to vehicle traffic and for parking lots.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 kg canister","offer_id":58279094321534,"sku":"DS-90","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-ds-90-1_782c33d8-6461-4d3a-9d9b-75b2e300f55b.png?v=1792594277"},{"product_id":"ds-120","title":"DS-120 – solvent-based clear coating for flooring surfaces","description":"\u003cp\u003eDS-120 is a clear varnish based on high-quality special resins, designed to protectively seal stamped concrete, natural stone and similar surfaces. It is applied as a final coat to concrete slabs, sealing and protecting them while slowing wear. It also acts as a dustproof coating.\u003c\/p\u003e\u003cp\u003eThe product is part of the manufacturer’s solvent-based range (aromatic hydrocarbon solvents) and is applied undiluted. It forms a glossy, waterproof film with excellent adhesion that is resistant to abrasion, weathering, alkalis and fats, and enhances the appearance of the paving. Compared with DS-90, it has a higher solids content (36 ± 1%) and a shelf life of 12 months.\u003c\/p\u003e\u003cp\u003eIt is used on stamped concrete made with Colorcem Impreso or Colorcem 1 cm, after curing for at least 28 days and after Desmoldeante P release agent has been completely removed and the surface has dried. The film does not allow water vapor to pass through, so a vapor barrier must be installed before concreting. Light colors may yellow slightly; to avoid this, the manufacturer recommends MS-83, which is also the specifically recommended varnish for areas subject to vehicle traffic and for parking lots.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"Canister, 25 kg","offer_id":58279094583678,"sku":"DS-120","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-ds-120-1_ed6452bc-682f-41fa-990b-a1cfe7d56f4a.png?v=1792594285"},{"product_id":"ms-83","title":"MS-83 Methacrylate – non-yellowing methacrylate sealing varnish","description":"\u003cp\u003eMS-83 Metacrilato is a clear, pure methacrylate-based sealing varnish for protecting stamped concrete, stone paving and concrete slabs. It offers high hardness and resistance to ultraviolet rays, and does not yellow when exposed to sunlight.\u003c\/p\u003e\u003cp\u003eIt forms a hard, protective and decorative glossy film that seals the surface, reduces wear from traffic, acts as a dust-proof coating, reduces salt deposits (efflorescence) and enhances the color of the paving. It is resistant to abrasion, weathering, alkalis and grease.\u003c\/p\u003e\u003cp\u003eThis solvent-based product is part of the manufacturer's range. The manufacturer specifically recommends MS-83 for areas subject to vehicle traffic and for car parks instead of the water-based Aguasol varnishes, as it is significantly more durable. It is also recommended instead of DS-90, DS-120 and MS-90 when yellowing of light colors must be avoided.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 L canister","offer_id":58279094976894,"sku":"MS-83","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-ms-83-1_10f828ee-a86e-4f99-8338-38941a3f9f40.png?v=1792594293"},{"product_id":"ms-90","title":"MS-90 – solvent-based acrylic sealing varnish","description":"\u003cp\u003eMS-90 is a clear sealing varnish for protecting concrete floors, based on acrylic resins dissolved in aromatic solvents. It offers good hardness and resistance to ultraviolet rays. It penetrates the surface, binds the particles together and increases the cohesion of the floor.\u003c\/p\u003e\u003cp\u003eIt forms a hard, protective and decorative glossy film that resists abrasion, weathering, acids, alkalis, cleaning agents and grease. It acts as a sealing and dust-proof coating and enhances the appearance of the floor. It may yellow on light-colored surfaces.\u003c\/p\u003e\u003cp\u003eApply undiluted to stamped concrete once it has cured, the Desmoldeante P release agent has been completely removed, and the surface has dried to a moisture content below 4%. A vapor barrier beneath the slab is required. Unlike the water-based Aguasol varnishes, MS-90 is solvent-based. If yellowing must be avoided, the manufacturer recommends MS-83 Metacrilato.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"25 kg canister","offer_id":58279095206270,"sku":"MS-90","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-ms-90-1_0f32fadf-09dc-4446-a304-17b8c9aa0ffe.png?v=1792594301"},{"product_id":"vosachen-zapechatvasht-produkt-za-beton","title":"Concrete sealer – wax-based, semi-gloss finish","description":"\u003cp\u003eLiquid wax product for sealing and protecting concrete and mortar surfaces and floors. Seals the surface and makes it waterproof, leaving a semi-gloss finish.\u003c\/p\u003e\u003cp\u003eProvides lasting protection against wear and reduces staining by greatly limiting the penetration of water, grease, acids and oils. Penetrates well, hardens and densifies the surface, and makes subsequent polishing easier.\u003c\/p\u003e\u003cp\u003eUsed as the final step in concrete polishing and diamond grinding. Apply with a spray bottle and work in using a rotary machine fitted with a white pad. Once applied and reacted, the product is completely inert.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"5 L canister","offer_id":58279095894398,"sku":null,"price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-sellador-abrillantador-1_95293204-7cb6-4e69-8b70-f88667e3bb70.png?v=1792594308"},{"product_id":"hc9","title":"HC9 - anti-slip wax sealer for concrete","description":"\u003cp\u003eHC9 is a white, wax-based liquid product for sealing and protecting concrete and mortar surfaces and stone floors (marble, terrazzo, limestone). It seals and waterproofs the surface, giving it a semi-gloss, slip-resistant finish.\u003c\/p\u003e\u003cp\u003eIt provides lasting protection against wear and reduces staining by limiting the penetration of water, grease, acids and oils. It penetrates well, hardens and seals the surface, and makes subsequent polishing easier.\u003c\/p\u003e\u003cp\u003eIt is used as the final step in polishing and diamond grinding concrete. Apply with a sprayer and work in with a rotary machine fitted with a white pad. Once applied and reacted, the product is completely inert.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"5 L canister","offer_id":58279095992702,"sku":"HC9","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-hc9-1_7822a7de-f9b7-48d7-9746-3ef4297cdd83.jpg?v=1792594317"},{"product_id":"disol-hidrofugante","title":"Hidrofugante MH Disol – water repellent for mineral substrates","description":"\u003cp\u003eHidrofugante MH Disol is a water repellent that impregnates the substrate and prevents water absorption while allowing moisture to evaporate naturally. After application, water from external sources cannot penetrate the substrate, while any moisture already present dries through evaporation.\u003c\/p\u003e\u003cp\u003eIt is used as an impregnating agent for mineral substrates: bricks, clinker, calcareous sandstone, natural stone and mineral renders. It can also be added to mortar or concrete for integral water repellency and to prevent salt efflorescence.\u003c\/p\u003e\u003cp\u003eIt contains no solvents and generally does not change the appearance of the surface. A preliminary test is recommended.\u003c\/p\u003e","brand":"Morteros Henares","offers":[{"title":"Tube, 1.5 L","offer_id":58279124435326,"sku":null,"price":1.0,"currency_code":"EUR","in_stock":true},{"title":"10 L jerrycan","offer_id":58279124468094,"sku":null,"price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/files\/vg-disol-hidrofugante-1_86639b20-5182-4773-af71-81e06c17c80d.jpg?v=1792594820"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9066\/2526\/collections\/vg-ms-83-1_10f828ee-a86e-4f99-8338-38941a3f9f40.png?v=1792683642","url":"https:\/\/vertigosk.com\/en\/collections\/lakove-i-impregnanti.oembed","provider":"Vertigo","version":"1.0","type":"link"}