Skip to product information
Aguasol Acril запечатващ лак на акрилна основа за щампован бетон, туба

Aguasol Acril – pure acrylic water-based sealant varnish

При запитване
Реф. номер AGUASOL ACRIL
25 L drum · Coverage approximately 9.9 m²/L · Covers ~247 m²
В наличност

Concentrated sealer varnish, pure acrylic, water-based.
Dilute with at least 50% water. Satin finish, non-yellowing.
Coverage approx. 9.9 m²/L. 25 L container.

Packaging25 L canister
Колко квадрата ще покриваш?
м²

Изчислението е ориентировъчно и се закръгля нагоре до цяла опаковка.

Цената е при запитване. Или се обади: +359 879 112 284

  • Cash on delivery
  • Delivery within 1–3 business days
  • Returns within 14 days

Aguasol Acril is a concentrated sealing varnish based on pure acrylic emulsion, designed to seal and protect stamped concrete in indoor and outdoor areas. It is particularly suitable for protecting exterior concrete paving and is also used to maintain all types of concrete paving over time.

Before use, dilute with at least 50% clean water. It forms a satin, slightly glossy film that does not yellow, is alkali-resistant, preserves the original texture of the paving, and reduces the formation of cracks. It dries quickly: touch-dry in about 30 minutes, and a subsequent coat can be applied after about 4 hours.

Apply to stamped concrete finished with Colorcem Impreso, after removing the release agent Desmoldeante P. As a water-based product, Aguasol Acril is not recommended for areas with vehicle traffic or car parks, as hot tires may soften or lift the film. For these areas, the manufacturer recommends solvent-based MS-83, which is significantly more resistant.

Aguasol Acril is used to seal and protect decorative concrete floors subject to pedestrian traffic.

  • Sealing and protecting stamped concrete, indoors and outdoors
  • Vertical decorative mortars
  • Preserving and maintaining all types of concrete floors over time
  • Outdoor tiles and floors with a textured, unpolished surface

Not recommended for areas subject to vehicle traffic or for parking lots. For these applications, the manufacturer recommends solvent-based MS-83.

Consumption

Coverage of approximately 9.9 m²/l.

Packaging

25 L canisters.

Product preparation

1. Shake the container before opening. After opening, stir the product by hand with a clean, dry wooden or rust-free metal stirrer.

2. Dilute with at least 50% clean water and stir until uniform. Do not use salty, chemically contaminated, cloudy or highly calcareous water, as it may alter the coating and cause staining.

New stamped concrete

3. Wait at least 72 hours after laying the paving.

4. Remove any Desmoldeante P residue (no more than 3% is permitted) and anything else that could impair adhesion: sweep the surface, scrub it with water and mild soap using a soft brush, then rinse with clean water at low pressure. High pressure may erode the wear layer.

5. Allow the concrete to dry for about 24 hours.

6. Apply evenly using a spray gun, brush or roller, taking care not to leave puddles. If spraying, follow up with a roller or brush to remove excess product and ensure it bonds to Colorcem Impreso.

7. For a perfect finish, apply two coats at least 48 hours apart.

Old surfaces and maintenance

8. Remove dust, grease, curing compound and anything else that could impair adhesion, using mechanical methods (sanding, wire brushing) and water. Allow the surface to dry, then apply the product as described above.

9. Depending on traffic and climate, apply a new coat every 2–3 years.

Reference|AGUASOL ACRIL
Base|Water, pure acrylic polymer
Appearance|Liquid
Colour|White
Film finish|Satin
Solids content|31 ± 0.5%
Touch-dry time|30 minutes
Time before next coat|4 hours
Dilution|With at least 50% clean water
Coverage|9.9 m²/L
Application temperature|+10 to +25 °C
The values are indicative and depend on site conditions.

Storage

In the original sealed packaging, protected from the elements, direct sunlight and frost. Do not expose to temperatures above 30 °C. Shelf life: 6 months from the date of manufacture when stored correctly.

Precautions

  • Application temperature: +10 to +25 °C.
  • Do not apply if there is a risk of frost or rain, in strong winds, in direct sunlight or at high relative humidity.
  • In hot weather, do not apply to a surface that has been exposed to direct sunlight.
  • Do not apply in a very thick layer or leave puddles.
  • Avoid frequent use of de-icing salts, which can damage the concrete.

Used together with

Frequently Asked Questions

Най-честите въпроси за доставката, плащането и работата с материалите. Не намираш отговор? Обади се на +359 879 112 284.

Всеки продукт има посочен разход на квадратен метър и покритие на опаковка. На страницата на продукта има калкулатор: въвеждаш площта и той пресмята колко опаковки са нужни и попълва количеството в запитването.

При по-голям обект или сложна основа ни се обади, правим точна сметка безплатно.

Да. „ВЕРТИГО СК" ЕООД е официален дистрибутор за България на испанския производител Morteros Henares. Всички материали идват директно от завода, с оригинални опаковки и придружаващи документи: техническа карта, информационен лист за безопасност и декларация за експлоатационни показатели.

Да, доставяме до всяко населено място в България с куриер.

  • Отделни торби и кофи: обикновено 1-3 работни дни.
  • Палети и по-големи количества: 3-5 работни дни, с предварително уговорен ден.

Срокът започва да тече от потвърждаването на поръчката. Подробностите са в условията за доставка.

Да. Плащаш на куриера при получаване на пратката. Приемаме и банков превод, удобно е за фирми и за по-големи количества, защото фактурата излиза веднага.

Да. Ако ти трябва фактура на фирма, напиши данните в полето за бележки при поръчката или ни пиши на lubomire73@gmail.com. Издаваме фактурата към поръчката и я изпращаме по имейл.

Цветовете в картата са ориентировъчни. Крайният тон зависи от цвета на бетона под материала, от влажността при полагане, от дълбочината на текстурата и от запечатващия лак.

Затова винаги поръчвай целия материал за един обект наведнъж и по възможност от една партида, така тонът е еднакъв по цялата площ.

За щампован бетон са нужни три неща: цветна посипка, отделител (за да не залепва щампата) и запечатващ лак накрая. Щампите се наемат или купуват отделно.

Използвай калкулатора „Колко материал ти трябва?". Той изчислява количествата за цялата система, а не само за един продукт.

Да. За палетни количества и за обекти работим с отделни цени. Пиши ни площта на обекта и желаните цветове през формата за контакт или се обади на +359 879 112 284, връщаме оферта до един работен ден.

Да, имаш 14 дни да се откажеш от поръчката без да посочваш причина. Материалът трябва да е в оригинална неотворена опаковка и в търговски вид.

Целият ред е описан в Връщане и замяна.

Да, безплатно. Обади се на +359 879 112 284 в работно време (понеделник - петък, 08:00-18:00 ч.) и опиши обекта: какъв е бетонът, каква площ, на закрито или на открито. Ще ти кажем кои материали са правилните и в какво количество.

Not sure what you need?

Call or write to us. We can help you choose a system and work out the quantities before you order.

Monday–Friday, 08:00–18:00 h.