Materials for Stamped and industrial concrete
Colorcem, Rodadur, Aguasol, and MH stamps all in one place. Calculate the quantities for your project and order with delivery nationwide.
Shop by category

Prints and shapes
Pavers and slabs, stone, slate, wood, curbs, vertical stamps

Dissolve
Decorative mortars and toppings, fiber-reinforced, high-strength

Fluids and additives
Primers, resins, hardeners, varnishes, cleaning

Fibre
Polypropylene, glass, and steel fibers

Pigments and dyes
Pigments for mortars and dyes for varnishes

Tools
Trowels, rollers, floats, levels, brushes
What will you perform?
Choose the application and you’ll see the products needed for it.
- Stamped concreteScattering materials, release agents, varnishes, and stamps for a new decorative floor finish.
- Industrial floorsHardeners, high-strength mortars and curing products for warehouses and car parks.
- Concrete repairMortars and primers for concrete repair and renovation.
- Decorative FlooringStamped layer, microtoppings, and colors for decorative floors.
- Vertical surfacesSolutions and prints for walls, facades, and fences.
- Artificial rocks and decorThixotropic solutions and textured rollers for rocks, reliefs, and decorative finishes.
Official distributor of Morteros Henares in Bulgaria
Vertigo SK supplies materials from the Spanish manufacturer Morteros Henares: Colorcem colored mortars and dry-shake hardeners, Rodadur hardeners, Aguasol sealers, and MH rubber stamps. The catalog also features professional tools from Kraft Tool, Topcon, and Stabila.
The materials come with technical data sheets from the manufacturer, and you can call us for help choosing a system and calculating quantities.
- Colorcem
- Rodadur
- Aguasol
- MH
- Kraft Tool
- Cash on deliveryYou pay the courier upon delivery.
- Nationwide deliveryBy courier to any location.
- Technical consultation0879 112 284, during business hours.
- Technical Data SheetsYou download them from the product page.
Stamped concrete in four steps
The manufacturer’s method for a new surface: broadcast, release agent, stamping and sealer. The products work as a system.
-
1
Colorcem PrintedIt is broadcast over the fresh concrete in two passes and worked in with a trowel. Consumption: 3–5 kg/m².View the product
-
2
Release agent PIt is sprinkled over the dry-shake hardener immediately before stamping. Consumption: 100–200 g/m².View the product
-
3
MH printsThey are pressed evenly until the texture of stone, cobblestone, slate, or wood is imprinted.Choose a print design
-
4
Aguasol Plus or DS-90After a minimum of 48 hours, wash off the release agent and seal the surface with varnish.View the product
How many bags and jugs do you need? The calculator works out the entire system for your area.
Calculate the quantitiesHow much material do you need?
Choose the type of work and the area. The calculator works out the entire system based on the manufacturer’s recommended coverage rates and adds it to your cart with one click.
Бележки към изчислението
The quantities are approximate: they are based on the consumption rates specified in the Morteros Henares technical data sheets, using the midpoint of each range and rounding up to whole packages. Actual consumption depends on the substrate, color, and application method.
Frequently Asked Questions
Най-честите въпроси за доставката, плащането и работата с материалите. Не намираш отговор? Обади се на +359 879 112 284.
Всеки продукт има посочен разход на квадратен метър и покритие на опаковка. На страницата на продукта има калкулатор: въвеждаш площта и той пресмята колко опаковки са нужни и попълва количеството в запитването.
При по-голям обект или сложна основа ни се обади, правим точна сметка безплатно.
Да. „ВЕРТИГО СК" ЕООД е официален дистрибутор за България на испанския производител Morteros Henares. Всички материали идват директно от завода, с оригинални опаковки и придружаващи документи: техническа карта, информационен лист за безопасност и декларация за експлоатационни показатели.
Да, доставяме до всяко населено място в България с куриер.
- Отделни торби и кофи: обикновено 1-3 работни дни.
- Палети и по-големи количества: 3-5 работни дни, с предварително уговорен ден.
Срокът започва да тече от потвърждаването на поръчката. Подробностите са в условията за доставка.
Да. Плащаш на куриера при получаване на пратката. Приемаме и банков превод, удобно е за фирми и за по-големи количества, защото фактурата излиза веднага.
Да. Ако ти трябва фактура на фирма, напиши данните в полето за бележки при поръчката или ни пиши на lubomire73@gmail.com. Издаваме фактурата към поръчката и я изпращаме по имейл.
Цветовете в картата са ориентировъчни. Крайният тон зависи от цвета на бетона под материала, от влажността при полагане, от дълбочината на текстурата и от запечатващия лак.
Затова винаги поръчвай целия материал за един обект наведнъж и по възможност от една партида, така тонът е еднакъв по цялата площ.
За щампован бетон са нужни три неща: цветна посипка, отделител (за да не залепва щампата) и запечатващ лак накрая. Щампите се наемат или купуват отделно.
Използвай калкулатора „Колко материал ти трябва?". Той изчислява количествата за цялата система, а не само за един продукт.
Да. За палетни количества и за обекти работим с отделни цени. Пиши ни площта на обекта и желаните цветове през формата за контакт или се обади на +359 879 112 284, връщаме оферта до един работен ден.
Да, имаш 14 дни да се откажеш от поръчката без да посочваш причина. Материалът трябва да е в оригинална неотворена опаковка и в търговски вид.
Целият ред е описан в Връщане и замяна.
Да, безплатно. Обади се на +359 879 112 284 в работно време (понеделник - петък, 08:00-18:00 ч.) и опиши обекта: какъв е бетонът, каква площ, на закрито или на открито. Ще ти кажем кои материали са правилните и в какво количество.
Not sure what you need?
Call or write to us. We’ll help you choose a system and determine the quantities before you order.
Monday–Friday, 08:00–18:00 h.















