Skip to product information
Colorcem Impreso, цветна посипка за щампован бетон

Colorcem Impreso – colored hardener for stamped concrete

При запитване
Реф. номер -
25 kg bag · Consumption 3–5 kg/m² · Coverage ~6 m²
В наличност

Colored dry-shake topping for stamped concrete, based on high-strength cement and pigments.
Spread over fresh concrete and stamped using texture mats.
Coverage: 3–5 kg/m². 25 kg bag, available in 20 colors.

PackagingBag, 25 kg
Color
Колко квадрата ще покриваш?
м²

Изчислението е ориентировъчно и се закръгля нагоре до цяла опаковка.

Цената е при запитване. Или се обади: +359 879 112 284

  • Cash on delivery
  • Delivery within 1–3 business days
  • Returns within 14 days

Colorcem Impreso is a colored dry powder mortar for the wear-resistant layer of stamped concrete pavements. It is made from high-strength cements, pigments, selected aggregates, and high-purity additives.

The product is spread over fresh concrete, worked in with a trowel, and then stamped. This creates a decorative layer with high resistance to abrasion and pressure that protects the concrete. Textures resembling paving stones, natural stone, slate, wood, tiles, and more are possible.

Colorcem Impreso is used as part of a system with Desmoldeante P release agent, which is broadcast before stamping, and Aguasol Plus or DS-90 sealant, which is applied after the release agent has been cleaned off and the surface has dried.

Colorcem Impreso is used for decorative stamped concrete paving:

  • Pedestrian areas and accessways: parks and gardens, urban pedestrian zones, squares, sidewalks
  • Outdoor recreation areas: commercial and leisure centers
  • Parking areas
  • Residential areas: houses, residential complexes, recreation areas, around swimming pools

Consumption

Consumption is 3–5 kg/m²depending on the color chosen. One 25 kg bag covers about 5–8 m², averaging around 6 m².

Packaging

25 kg bag with a moisture-resistant polyethylene layer. 1000 kg pallet (40 bags).

1. After spreading and leveling the fresh concrete, approximately two-thirds of the specified amount of Colorcem Impreso is spread evenly. The entire area should be covered, with no piles or areas with too little material.

2. The color hardener is worked into the concrete with a steel trowel once the sheen of water has disappeared from the surface.

3. After 1 hour, the remaining amount is spread and the surface is troweled again.

4. Immediately afterward, Desmoldeante P release agent is broadcast so that the surface is well covered, and the operation is repeated.

5. The stamps are placed and pressed down evenly until the desired texture is achieved.

6. After a minimum of 48 hours, the Desmoldeante P release agent is removed by sweeping or with pressurized water.

7. Once the surface is dry and at least 48 hours have passed (more or less, depending on the climate), apply Aguasol Plus or DS-90 sealer.

Appearance|Powder
Colour|20 colours in the chart
Compressive strength, 28 days|60 N/mm² (EN 13892-2)
Flexural strength, 28 days|10 N/mm² (EN 13892-2)
Böhme abrasion|Class A15, max. 15 cm³/50 cm² (UNE-EN 13892-3)
Böhme abrasion, laboratory result|14.8 cm³/50 cm²
Consumption|3–5 kg/m²
Application temperature|+5 to +35 °C
Shelf life|12 months
Tested according to EN 13892-2 and UNE-EN 13892-3.

Storage

In the original, unopened packaging, protected from the elements. Shelf life is 12 months from the date of manufacture when stored correctly.

Precautions

  • Apply at temperatures between +5 and +35 °C. Do not apply if there is a risk of frost.
  • The time between application stages depends on the temperature and humidity.
  • The quality of the concrete has a significant impact on the final appearance of the surface.
  • Avoid excess water on the concrete surface. Do not add water after the product has been spread.
  • Wash tools with water immediately after use.
  • For normal, light traffic, maintenance of the sealing layer is recommended every two years.
  • For greater resistance to salt water, the manufacturer offers an R.A.S. version on request.

Used together with

Frequently Asked Questions

Най-честите въпроси за доставката, плащането и работата с материалите. Не намираш отговор? Обади се на +359 879 112 284.

Всеки продукт има посочен разход на квадратен метър и покритие на опаковка. На страницата на продукта има калкулатор: въвеждаш площта и той пресмята колко опаковки са нужни и попълва количеството в запитването.

При по-голям обект или сложна основа ни се обади, правим точна сметка безплатно.

Да. „ВЕРТИГО СК" ЕООД е официален дистрибутор за България на испанския производител Morteros Henares. Всички материали идват директно от завода, с оригинални опаковки и придружаващи документи: техническа карта, информационен лист за безопасност и декларация за експлоатационни показатели.

Да, доставяме до всяко населено място в България с куриер.

  • Отделни торби и кофи: обикновено 1-3 работни дни.
  • Палети и по-големи количества: 3-5 работни дни, с предварително уговорен ден.

Срокът започва да тече от потвърждаването на поръчката. Подробностите са в условията за доставка.

Да. Плащаш на куриера при получаване на пратката. Приемаме и банков превод, удобно е за фирми и за по-големи количества, защото фактурата излиза веднага.

Да. Ако ти трябва фактура на фирма, напиши данните в полето за бележки при поръчката или ни пиши на lubomire73@gmail.com. Издаваме фактурата към поръчката и я изпращаме по имейл.

Цветовете в картата са ориентировъчни. Крайният тон зависи от цвета на бетона под материала, от влажността при полагане, от дълбочината на текстурата и от запечатващия лак.

Затова винаги поръчвай целия материал за един обект наведнъж и по възможност от една партида, така тонът е еднакъв по цялата площ.

За щампован бетон са нужни три неща: цветна посипка, отделител (за да не залепва щампата) и запечатващ лак накрая. Щампите се наемат или купуват отделно.

Използвай калкулатора „Колко материал ти трябва?". Той изчислява количествата за цялата система, а не само за един продукт.

Да. За палетни количества и за обекти работим с отделни цени. Пиши ни площта на обекта и желаните цветове през формата за контакт или се обади на +359 879 112 284, връщаме оферта до един работен ден.

Да, имаш 14 дни да се откажеш от поръчката без да посочваш причина. Материалът трябва да е в оригинална неотворена опаковка и в търговски вид.

Целият ред е описан в Връщане и замяна.

Да, безплатно. Обади се на +359 879 112 284 в работно време (понеделник - петък, 08:00-18:00 ч.) и опиши обекта: какъв е бетонът, каква площ, на закрито или на открито. Ще ти кажем кои материали са правилните и в какво количество.

Not sure what you need?

Call or write to us. We can help you choose a system and work out the quantities before you order.

Monday–Friday, 08:00–18:00 h.