Skip to product information
DS-90 прозрачен запечатващ лак за щампован бетон, бидон

DS-90 – transparent solvent-based sealing varnish

При запитване
Реф. номер DS-90
25 kg canister · Coverage rate 250 g/m² · Covers ~100 m²
В наличност

Clear solvent-based gloss varnish for stamped concrete and stone.
Seals, protects and dustproofs the surface.
Coverage: 250 g/m². 25 kg container.

Packaging25 kg canister
Колко квадрата ще покриваш?
м²

Изчислението е ориентировъчно и се закръгля нагоре до цяла опаковка.

Цената е при запитване. Или се обади: +359 879 112 284

  • Cash on delivery
  • Delivery within 1–3 business days
  • Returns within 14 days

DS-90 is a clear varnish based on high-quality special resins, designed for the protective sealing of stamped concrete, natural stone and similar surfaces. It is applied as a final coat to concrete slabs, sealing and protecting them and slowing their wear. It also acts as a dustproof coating.

The product belongs to the manufacturer’s solvent-based range (aromatic hydrocarbon solvents) and is applied undiluted. It forms a glossy, waterproof film with excellent adhesion that is resistant to abrasion, weathering, alkalis and grease, enhancing the appearance of the paving. On light-colored surfaces, it may yellow slightly over time and when exposed to sunlight.

It is used on stamped concrete made with Colorcem Impreso or Colorcem 1, after allowing it to cure for at least 28 days and ensuring that the release agent Desmoldeante P has been completely removed and the surface has dried. The film is impermeable to water vapor, so a vapor barrier must be installed before the concrete is poured. Where yellowing must be avoided, the manufacturer recommends MS-83, which is also the specifically recommended varnish for areas subject to vehicle traffic and for parking lots.

DS-90 is used as a protective finishing layer on concrete and stone surfaces.

  • Stamped concrete
  • Concrete slabs, as a sealing and dustproof coating
  • Plasters and vertical mortars
  • Natural stone

Consumption

Consumption 250 g/m².

Packaging

25 kg drums. Pallet of 24 drums.

1. Before concreting, a polyethylene sheet (400 gauge) is laid over the base and turned up along the sides to act as a vapor barrier. This step is mandatory.

2. Allow at least 28 days for the concrete to cure fully.

3. Use a moisture meter to check several points and confirm that the surface moisture is below 4%. Washing with Desmoldeante P dampens the surface, so allow it to dry again until it is below this value.

4. The surface must be dry and free of dust, grease, dirt, and anything that could impair adhesion. No more than 3% release agent residue is permitted.

5. Ensure maximum ventilation during application and avoid inhaling the vapors.

6. Apply the product directly, without adding solvents, using a spray gun to form an even film without thick layers. Possible application methods: airless spray gun, air spray gun, brush, or roller.

7. Once the first coat has dried, a second coat may be applied, avoiding excess product, including in the joints.

8. Clean the tools with a universal solvent.

Reference|DS-90
Base|Solvent-based, special resins
Appearance|Glossy
Color|Transparent
Density|0.91 ± 0.01 g/cm³
Drying time|1–2 hours
Solids content (by weight)|28 ± 1%
Consumption|250 g/m²
Application temperature|+5 to +30 °C
Substrate moisture|below 4%
The values are indicative and depend on site conditions.

Storage

In original sealed packaging, protected from the elements. Shelf life is 6 months from the date of manufacture when stored correctly.

Precautions

  • Read the safety data sheet before use.
  • Work in well-ventilated areas and avoid inhaling vapours from aromatic hydrocarbon solvents.
  • Use appropriate personal protective equipment to prevent skin contact.
  • Application temperature: +5 to +30 °C. Do not apply if frost is expected or after prolonged exposure to strong sunlight.
  • With light colours, the varnish may yellow slightly over time and when exposed to sunlight.

Used together with

Frequently Asked Questions

Най-честите въпроси за доставката, плащането и работата с материалите. Не намираш отговор? Обади се на +359 879 112 284.

Всеки продукт има посочен разход на квадратен метър и покритие на опаковка. На страницата на продукта има калкулатор: въвеждаш площта и той пресмята колко опаковки са нужни и попълва количеството в запитването.

При по-голям обект или сложна основа ни се обади, правим точна сметка безплатно.

Да. „ВЕРТИГО СК" ЕООД е официален дистрибутор за България на испанския производител Morteros Henares. Всички материали идват директно от завода, с оригинални опаковки и придружаващи документи: техническа карта, информационен лист за безопасност и декларация за експлоатационни показатели.

Да, доставяме до всяко населено място в България с куриер.

  • Отделни торби и кофи: обикновено 1-3 работни дни.
  • Палети и по-големи количества: 3-5 работни дни, с предварително уговорен ден.

Срокът започва да тече от потвърждаването на поръчката. Подробностите са в условията за доставка.

Да. Плащаш на куриера при получаване на пратката. Приемаме и банков превод, удобно е за фирми и за по-големи количества, защото фактурата излиза веднага.

Да. Ако ти трябва фактура на фирма, напиши данните в полето за бележки при поръчката или ни пиши на lubomire73@gmail.com. Издаваме фактурата към поръчката и я изпращаме по имейл.

Цветовете в картата са ориентировъчни. Крайният тон зависи от цвета на бетона под материала, от влажността при полагане, от дълбочината на текстурата и от запечатващия лак.

Затова винаги поръчвай целия материал за един обект наведнъж и по възможност от една партида, така тонът е еднакъв по цялата площ.

За щампован бетон са нужни три неща: цветна посипка, отделител (за да не залепва щампата) и запечатващ лак накрая. Щампите се наемат или купуват отделно.

Използвай калкулатора „Колко материал ти трябва?". Той изчислява количествата за цялата система, а не само за един продукт.

Да. За палетни количества и за обекти работим с отделни цени. Пиши ни площта на обекта и желаните цветове през формата за контакт или се обади на +359 879 112 284, връщаме оферта до един работен ден.

Да, имаш 14 дни да се откажеш от поръчката без да посочваш причина. Материалът трябва да е в оригинална неотворена опаковка и в търговски вид.

Целият ред е описан в Връщане и замяна.

Да, безплатно. Обади се на +359 879 112 284 в работно време (понеделник - петък, 08:00-18:00 ч.) и опиши обекта: какъв е бетонът, каква площ, на закрито или на открито. Ще ти кажем кои материали са правилните и в какво количество.

Not sure what you need?

Call or write to us. We can help you choose a system and work out the quantities before you order.

Monday–Friday, 08:00–18:00 h.