Skip to product information
MS-90 прозрачен акрилен запечатващ лак за щампован бетон, бидон

MS-90 – solvent-based acrylic sealing varnish

При запитване
Реф. номер MS-90
25 kg container · Coverage 165 g/m² · Covers ~151 m²
В наличност

Transparent solvent-based acrylic varnish for stamped concrete and stone.
Hard, glossy film resistant to acids, alkalis, and grease.
Coverage: 165 g/m² (approx. 6 m²/l). 25 kg canister.

Packaging25 kg canister
Колко квадрата ще покриваш?
м²

Изчислението е ориентировъчно и се закръгля нагоре до цяла опаковка.

Цената е при запитване. Или се обади: +359 879 112 284

  • Cash on delivery
  • Delivery within 1–3 business days
  • Returns within 14 days

MS-90 is a clear sealing varnish for protecting concrete floors, based on acrylic resins dissolved in aromatic solvents. It offers good hardness and resistance to ultraviolet rays. It penetrates the surface, binds the particles together and increases the cohesion of the floor.

It forms a hard, protective and decorative glossy film that resists abrasion, weathering, acids, alkalis, cleaning agents and grease. It acts as a sealing and dust-proof coating and enhances the appearance of the floor. It may yellow on light-colored surfaces.

Apply undiluted to stamped concrete once it has cured, the Desmoldeante P release agent has been completely removed, and the surface has dried to a moisture content below 4%. A vapor barrier beneath the slab is required. Unlike the water-based Aguasol varnishes, MS-90 is solvent-based. If yellowing must be avoided, the manufacturer recommends MS-83 Metacrilato.

MS-90 is used as a protective finish coat on concrete and stone surfaces.

  • Stamped concrete, horizontal and vertical
  • Concrete slabs, as a sealing and dustproof coating
  • Stone surfaces

Consumption

Consumption 165 g/m², approximately 6 m²/l.

Packaging

25 kg drums. A pallet of 26 drums.

1. Before concreting, polyethylene sheeting (400 gauge) is laid over the base and turned up along the sides to act as a vapor barrier. It prevents moisture from below or from adjacent gardens from lifting the film.

2. Apply only after the surface has hardened, Desmoldeante P has been thoroughly removed (no more than 3% residue is permitted), and the surface has dried completely. Surface moisture must be below 4%, measured with a moisture meter at several points.

3. The surface must be dry and free of dust, grease, dirt, and anything that could impair adhesion.

4. Ensure maximum ventilation during application and drying, as solvent vapors are released.

5. Apply the product undiluted with a sprayer, in an even film, without applying thick coats. A brush or roller may be used for touch-ups.

6. Once the first coat has dried, a second coat may be applied, taking care not to apply excess product, including in the joints.

7. Clean tools with a universal solvent.

8. Renew the coating regularly depending on the level of use: approximately once every two years for indoor or lightly used areas, and more frequently for areas subject to heavier use.

Reference|MS-90
Binder|Pure acrylic
Base|Solvent-based (aromatic solvents)
Appearance|Glossy
Color|Transparent
Density|0.90 ± 0.01 g/cm³
Drying time|1–2 hours
Solids content (by weight)|28 ± 1 %
Coverage|165 g/m² (approx. 6 m²/l)
Application temperature|+10 to +30 °C
Relative humidity during application|up to 85 %
Substrate moisture content|below 4 %
The values are approximate and depend on site conditions.

Storage

In the original sealed packaging, protected from the elements. Shelf life: 12 months from the date of manufacture when stored correctly.

Precautions

  • Read the safety data sheet before use.
  • Apply in well-ventilated areas and use suitable respiratory protection.
  • Ensure ventilation in enclosed spaces during application and drying.
  • Application temperature: +10 to +30 °C.
  • Do not apply when frost is expected, when relative humidity exceeds 85%, or after prolonged exposure to strong sunlight.
  • The varnish may yellow on light-colored surfaces.

Used together with

Frequently Asked Questions

Най-честите въпроси за доставката, плащането и работата с материалите. Не намираш отговор? Обади се на +359 879 112 284.

Всеки продукт има посочен разход на квадратен метър и покритие на опаковка. На страницата на продукта има калкулатор: въвеждаш площта и той пресмята колко опаковки са нужни и попълва количеството в запитването.

При по-голям обект или сложна основа ни се обади, правим точна сметка безплатно.

Да. „ВЕРТИГО СК" ЕООД е официален дистрибутор за България на испанския производител Morteros Henares. Всички материали идват директно от завода, с оригинални опаковки и придружаващи документи: техническа карта, информационен лист за безопасност и декларация за експлоатационни показатели.

Да, доставяме до всяко населено място в България с куриер.

  • Отделни торби и кофи: обикновено 1-3 работни дни.
  • Палети и по-големи количества: 3-5 работни дни, с предварително уговорен ден.

Срокът започва да тече от потвърждаването на поръчката. Подробностите са в условията за доставка.

Да. Плащаш на куриера при получаване на пратката. Приемаме и банков превод, удобно е за фирми и за по-големи количества, защото фактурата излиза веднага.

Да. Ако ти трябва фактура на фирма, напиши данните в полето за бележки при поръчката или ни пиши на lubomire73@gmail.com. Издаваме фактурата към поръчката и я изпращаме по имейл.

Цветовете в картата са ориентировъчни. Крайният тон зависи от цвета на бетона под материала, от влажността при полагане, от дълбочината на текстурата и от запечатващия лак.

Затова винаги поръчвай целия материал за един обект наведнъж и по възможност от една партида, така тонът е еднакъв по цялата площ.

За щампован бетон са нужни три неща: цветна посипка, отделител (за да не залепва щампата) и запечатващ лак накрая. Щампите се наемат или купуват отделно.

Използвай калкулатора „Колко материал ти трябва?". Той изчислява количествата за цялата система, а не само за един продукт.

Да. За палетни количества и за обекти работим с отделни цени. Пиши ни площта на обекта и желаните цветове през формата за контакт или се обади на +359 879 112 284, връщаме оферта до един работен ден.

Да, имаш 14 дни да се откажеш от поръчката без да посочваш причина. Материалът трябва да е в оригинална неотворена опаковка и в търговски вид.

Целият ред е описан в Връщане и замяна.

Да, безплатно. Обади се на +359 879 112 284 в работно време (понеделник - петък, 08:00-18:00 ч.) и опиши обекта: какъв е бетонът, каква площ, на закрито или на открито. Ще ти кажем кои материали са правилните и в какво количество.

Not sure what you need?

Call or write to us. We can help you choose a system and work out the quantities before you order.

Monday–Friday, 08:00–18:00 h.